PROJECTEnquire ↗Process plant upgrades
A new PP-H measuring tank, four ball valves, a level gauge and installation, with a documented 48-hour watertightness test.
Delivery scope & origin
Process equipment refurbishment and installationSupplier: EMKO PROJECT s.r.o.
The project in context
Refurbishment of a hydrochloric acid measuring tank in Rybitví included a new PP-H vessel, valves, a level gauge and installation connections. The vessel had a 1,200 mm internal diameter, a 2,000 mm cylindrical shell height and an 8 mm wall, with a documented workshop watertightness test.
The supply renewed the hydrochloric acid measuring tank together with its local accessories. The manufacturing drawing specifies PP-H, an internal diameter of 1,200 mm and a cylindrical shell height of 2,000 mm. The final delivery specifies an 8 mm wall.
Connections include a DN 50 inlet and vent, a DN 65 overflow, a DN 50 outlet and two DN 25 level-gauge connections. The 2,000 mm height relates to the cylindrical shell; the drawing separately defines nozzle and connection interfaces for installation.
The supply included two DN 50 ball valves, two DN 25 valves and one level gauge. It also covered connecting pipework, fasteners, gaskets, on-site handling, installation and as-built documentation.
The work linked vessel manufacture, accessory supply and installation at the existing process interfaces.
The manufacturing watertightness check used water filled to a height of 1,900 mm for 48 hours. The report records no measured loss after 24 or 48 hours and an acceptable result. This was a workshop watertightness test of the vessel itself.
The signed handover document subsequently confirms acceptance of the refurbished measuring tank and its suitability for continuous operation within the scope of the handed-over equipment.
A measuring tank handed over with valves, level indication and installation connections, supported by the vessel’s manufacturing watertightness record.
Related work
Project 667 · Process plant upgrades
Installation location: Lovosice, Czechia · 2024
Replacement of a 3.9 m³ reactor on a +6 m platform, including agitator assembly and modification of 15 pipe runs.
Broader project portfolioEquipment replacement, installation and connection
Project 674 · Process plant upgrades
Location: Rybitví, Czechia · 2024
New vacuum assembly with PP tanks, heat exchangers, piping, instrumentation and controls.
Broader project portfolioProcess equipment refurbishment and installation
Project 692 · Process plant upgrades
Installation location: Přerov, Czechia · 2024
A grade 1.4571 tank with an internal diameter of 1,950 mm, supplied in two sections and welded together during installation.
Broader project portfolioFabrication, installation and supply of a tank with agitator
Your next project
Send your drawings, operating parameters or a short description of the change you need. We will review the technical interfaces and propose the next steps towards a quotation, clarifying any missing information with you.
Discuss your requirements ↗Prepare a technical brief →+420 731 771 147info@emkoproject.cz
