PROJECTEnquire ↗
← All projects

Process plant upgrades

Process kettle insulation

Process cooker insulation: 80 mm mineral wool, galvanised cladding and a sealed drip collar.

Project: 725Location: Pardubice, CzechiaPeriod: 2024

Delivery scope & origin

Installation and service work

EMKO project portfolio. Supplier at the time of delivery: EMKO HOLDING s.r.o.

Process vessel with new metal cladding over the thermal insulation.

The project in context

Technology in its operating context.

Fabrication and installation of thermal insulation on a process cooker in Pardubice. An 80 mm mineral wool layer was covered with galvanised profiled sheet; the work also included sealing the drip collar.

Scope of work

  • Installation of 80 mm mineral wool insulation
  • Galvanised profiled sheet cladding
  • Drip collar sealed with silicone sealant

Insulation build-up

The work combined fabrication of the insulation layer with installation on the process cooker. The insulation material was 80 mm mineral wool. Galvanised profiled sheet provided the outer covering.

Cladding details

A separate part of the work was sealing the drip collar with silicone sealant against water ingress. The invoiced scope therefore covered the insulation material, installation and completion of the adjoining cladding detail.

Outcome

Fabricated and installed process cooker insulation, including protective cladding and collar sealing.

Thermal insulation of the process vessel during installation, before completion of the outer cladding.

Related work

More projects in this field.

Project photograph.

Project 667 · Process plant upgrades

Acidification reactor replacement

Installation location: Lovosice, Czechia · 2024

Replacement of a 3.9 m³ reactor on a +6 m platform, including agitator assembly and modification of 15 pipe runs.

Broader project portfolioEquipment replacement, installation and connection

1 reactor with a volume of 3.9 m³Details →
Project photograph.

Project 674 · Process plant upgrades

Vacuum system replacement

Location: Rybitví, Czechia · 2024

New vacuum assembly with PP tanks, heat exchangers, piping, instrumentation and controls.

Broader project portfolioProcess equipment refurbishment and installation

2 independent vacuum trainsDetails →
Project photograph.

Project 692 · Process plant upgrades

Stainless steel tank with agitator

Installation location: Přerov, Czechia · 2024

A grade 1.4571 tank with an internal diameter of 1,950 mm, supplied in two sections and welded together during installation.

Broader project portfolioFabrication, installation and supply of a tank with agitator

1 tank with an agitatorDetails →

Your next project

A clear brief.
A practical next step.

Send your drawings, operating parameters or a short description of the change you need. We will review the technical interfaces and propose the next steps towards a quotation, clarifying any missing information with you.

Discuss your requirements ↗Prepare a technical brief →+420 731 771 147info@emkoproject.cz